The heated glass table can be placed in the optical path of any stereo microscope to provide a large, flat, clear, warm surface where several specimens can be maintained at physiological temperature.
The combined action of the conductive glass with built in temperature sensor and of the state-of-the-art PID controller with 3.2’’ touch screen and advanced calibration routine ensures the highest accuracy on specimen temperature.
The Bold Line Cage Incubator maintains required environmental conditions for cell culture around the microscopy workstation, enabling prolonged observations on biological specimens and while allowing space for other equipment. Large volume microscope incubator with local CO2/O2 climate chamber.
Delivers superior temperature stability, humidity, CO2 and oxygen control - all fully integrated.
Thermal plates represent a one-button solution for temperature control. Ideal to warm up the specimen during experiments lasting from minutes to hours where humidity and CO2 control are not required.
The Water Jacket Incubator provides superior incubation stability above and below room temperature. Water is pumped from a water bath into the base plate and into the lid, which are both Water Jackets.
Temperature is measured inside a reference Petri-dish and is controlled by circulating water from a water bath into the Water Jacket Chamber.
Heated Plates and stage inserts keep samples at the correct temperature. The insert fits into the centre of the microscope stage. A T Glass table can be used with a stereo microscope; this sits over the lower part of the microscope and acts as the stage which samples are placed on for standby and viewing.
[CO2/air mix regulators and chambers are also available in various types and combinations.]